欧美成人精品手机在线观看,国产精品电影网在线好看,国产高清在线精品二区一,青青青国产精品国产精品久久久久,天堂电影mv免费在线观看2019,欧美日韩综合在线视频免费看,成人免费淫片免费观看,一区二区免费在线观看,久久精品国产欧美日韩亚洲

軸承標準 Bearing Standard

英國軸承標準(BS Bearing standards)
編號 中文名稱 英文名稱
BS 2000-168-2005 石油及其產品試驗方法.潤滑脂滾動軸承性能測定 Methods of test for petroleum and its products - Determination of rolling bearing performance of lubricating grease
BS 3134-1-1979 米制錐形滾子軸承.第1部分:單列軸承尺寸公差規范 Metric tapered roller bearings - Specification for dimensions and tolerances of single row bearings
BS 3134-2-1981 米制錐形滾柱軸承.第2部分:雙列軸承尺寸規范 Metric tapered roller bearings - Specification for dimensions of double row bearings
BS 3134-3-1981 米制錐形滾柱軸承.第3部分:外環凸緣尺寸規范 Metric tapered roller bearings - Specification for dimensions of flanged cups
BS 3134-4-1992 米制錐形滾柱軸承.第4部分:命名制度規范 Metric tapered roller bearings - Specification for designation system
BS 3332-1987 軸承用巴比合金錠規范 Specification for white metal bearing alloy ingots
BS 3338-10-1961 錫及錫合金取樣及分析方法.第10部分:錫錠、錫鉛焊料及軸承用巴比合金中鐵含量測定方法(光度測定法) Methods for the sampling and analysis of tin and tin alloys - Method for the determination of iron in ingot tin, tin-lead solders and white metal bearing alloys (photometric method)
BS 3338-13-1965 錫及錫合金取樣及分析方法.第13部分:焊料及軸承用巴比合金中銻含量測定方法(溴酸鉀容量法) Methods for the sampling and analysis of tin and tin alloys - Method for the determination of antimony in solders and white metal bearing alloys (volumetric: potassium bromate method)
BS 3338-14-1965 錫及錫合金的取樣及分析方法.第14部分:軸承用巴比合金錠取樣方法 Methods for the sampling and analysis of tin and tin alloys - Method for the sampling of white metal bearing alloy ingots
BS 3338-15-1965 錫及錫合金取樣及分析方法.第15部分:軸承用巴比合金中銅和鉛含量測定方法(電解鍍層法) Methods for the sampling and analysis of tin and tin alloys - Method for the determination of copper and lead in white metal bearing alloys (electrodeposition method)
BS 3338-16-1965 錫及錫合金取樣及分析方法.第16部分:軸承用巴比合金中錫含量測定方法(鎳帶卷還原法) Methods for the sampling and analysis of tin and tin alloys - Method for the determination of tin in white metal bearing alloys (nickel coil reduction method)
BS 3338-17-1965 錫及錫合金的取樣及分析方法.第17部分:焊料及軸承用巴比合金中鎘含量測定方法(光度測定法) Methods for the sampling and analysis of tin and tin alloys - Method for the determination of cadmium in solders and white metal bearing alloys (photometric method)
BS 3338-18-1966 錫及錫合金取樣及分析方法.第18部分:焊料及軸承用白合金中鋁含量測定方法(光度測定法) Methods for the sampling and analysis of tin and tin alloys - Method for the determination of aluminium in solders and white metal bearing alloys (photometric method)
BS 3338-19-1966 錫及錫合金的取樣及分析方法.白金屬軸承合金和釬料中鋅的測定方法(光度測定法) Methods for the sampling and analysis of tin and tin alloys - Method for the determination of zinc in solders and white metal bearing alloys (photometric method)
BS 3338-1966 錫及錫合金的取樣及分析方法.第19部分:焊料及白合金軸承中鋅的測定方法(光度測定法) Methods for the sampling and analysis of tin and tin alloys. Method for the determination of zinc in solders and white metal bearing alloys (photometric method)
BS 3338-8-1961 錫及錫合金取樣及分析方法.第8部分:錫錠、錫鉛焊料及軸承用巴比合金中鉍含量測定方法(光度測定法) Methods for the sampling and analysis of tin and tin alloys - Method for the determination of bismuth in ingot tin, tin-lead solders and white metal bearing alloys (photometric method)
BS 3338-9-1965 錫及錫合金取樣及分析方法.第9部分:錫錠、焊料及軸承用巴比合金中砷含量測定方法(光度測定法) Methods for the sampling and analysis of tin and tin alloys - Method for the determination of arsenic in ingot tin, solders and white metal bearing alloys (photometric method)
BS 3469-1985 儀器用精密滾子軸承(球軸承)規范 Specification for instrument precision rolling bearings (ball bearings)
BS 3SP 89-1983 飛機機體軸承特性、界面尺寸、容差及靜載荷等級規范 Specification for characteristics, boundary dimensions, tolerances and static load ratings of airframe bearings
BS 4480-1-1992 滑動軸承:米制系列.第1部分:燒結軸襯尺寸和公差 Plain bearings: metric series - Sintered bushes - Dimensions and tolerances
BS 4480-2-1974 滑動軸承規范.米制系列.第2部分:整體塑料軸套 Specification for plain bearings: metric series - Solid plastics bushes
BS 4480-3-1993 滑動軸承.米制系列.第3部分:銅合金套管 Plain bearings: metric series - Copper alloy bushes
BS 4480-4-1979 滑動軸承規范.米制系列.第4部分:卷制軸套尺寸、公差及檢驗方法 Specification for plain bearings: metric series - Dimensions, tolerances and methods of checking wrapped bushes
BS 4480-5-1979 滑動軸承規范.米制系列.第5部分:薄壁半軸承的尺寸、公差及檢驗方法 Plain bearings: metric series - Dimensions, tolerances and methods of checking thin-walled half bearings
BS 4480-6-1984 滑動軸承規范.米制系列.第6部分:帶材制環形止推墊圈尺寸公差規范 Plain bearings: metric series - Specification for dimensions and tolerances of ring type thrust washers made from strip
BS 4480-7-1984 滑動軸承規范.米制系列.第7部分:壓制雙金屬半止推墊圈的尺寸和公差規范 Plain bearings: metric series - Specification for dimensions and tolerances of pressed bimetallic half thrust washers
BS 4480-8-1984 滑動軸承規范.米制系列.第8部分:薄壁法蘭聯接半軸承的尺寸、公差及檢驗方法 Plain bearings: metric series - Specification for dimensions, tolerances and methods of checking of thin-walled flanged half bearings
BS 4480-9-1995 滑動軸承:第9部分:米制系列.襯套外徑測量 Plain bearings: metric series - Checking the outside diameter of wrapped bushes
BS 5512-1991 滾動軸承動態載荷額定值和額定壽命的計算方法 Method of calculating dynamic load ratings and rating life of rolling bearings
BS 5812-1-1979 滑動軸承材料.第1部分:整體軸承用鋁合金規范 Materials for plain bearings - Specification for aluminium alloy for solid bearings
BS 6010-3-1994 滾動軸承.第3部分:外球面加寬內圈軸承.第3部分:澆鑄和壓制軸承殼體尺寸規范 Rolling bearings - Bearings with speherical outside surface and extended inner ring width - Specification for dimensions of cast and pressed housings
BS 6107-3-1992 滾動軸承.公差.第3部分:徑向內部間隙規范 Rolling bearings: tolerances - Specifications for radial internal clearance
BS 6413-2-1983 潤滑劑、工業用油和相關產品(L級).第2部分:F系列的分類(主軸軸承、軸承和相關離合器) Lubricants, industrial oils and related products (class L) - Classification for family F (spindle bearings, bearings and associated clutches)
BS 7568-19-1992 沖壓工具.導襯.B形的普通球軸承隔離環襯.1型 Press tools - Guide bushes - Form B, ball cage bushes, plain, type 1
BS 7585-1-1992 多層金屬滑動軸承.第1部分:粘合力無損超聲波試驗方法 Metallic multilayer plain bearings - Method for non-destructive ultrasonic testing of bond
BS 7585-2-1992 多層金屬滑動軸承.第2部分:厚度為2mm的軸承金屬層粘合力的破壞性試驗方法 Metallic multilayer plain bearings - Method for destructive testing of bond for bearing metal layer thickness 2 mm
BS 7585-3-1992 多層金屬滑動軸承.第3部分:模滲透無損試驗方法 Metallic multilayer plain bearings - Method for non-destructive die penetrant testing
BS 7637-1993 線性運動、循環球、套管型滾動軸承規范(公制系列) Specification for linear motion, recirculating ball, sleeve type rolling bearings (metric series)
BS 7675-1993 滑動軸承.薄壁半軸承.周長檢驗 Plain bearings - Thin-walled half bearings - Checking of peripheral length
BS 7679-1993 普通軸承.幾何特性及材料質量特性的質量控制技術和檢驗 Plain bearings - Quality control techniques and inspection of geometrical and material quality characteristics
BS 7762-1994 滑動軸承.質量特性.統計過程控制(SPC) Plain bearings - Quality characteristics - Statistical process control (SPC)
BS 7772-1994 滑動軸承.薄壁半軸承和薄壁襯套的壁厚測量 Plain bearings - Measurement of wall thickness of thin-walled half-bearings and thin-walled bushes
BS 7823-1-1995 托架滑動軸承.軸承座部件規范 Pedestal plain bearings - Specification for pillow blocks
BS 7823-2-1995 托架滑動軸承.側邊法蘭軸承規范 Pedestal plain bearings - Specification for side flange bearings
BS 7823-3-1995 托架滑動軸承.中心法蘭軸承規范 Pedestal plain bearings - Specification for centre flange bearings
BS EN 12080-1998 鐵路設施.車箱體.滾動軸承 Railway applications - Axleboxes - Rolling bearings
BS EN 1337-10-2003 結構軸承.檢驗和維護 Structural bearings - Inspection and maintenance
BS EN 1337-11-1998 結構軸承.運輸,儲存和安裝 Structural bearings - Transport, storage and installation
BS EN 1337-4-2004 結構軸承.滾柱軸承 Structural bearings - Roller bearings
BS EN 1337-6-2004 結構軸承.搖桿軸承 Structural bearings - Rocker bearings
BS EN 1337-9-1998 結構軸承.防護 Structural bearings - Protection
BS EN 2009-1992 軸承.鋼的8號和9號直徑系列機體剛性單列球軸承、尺寸和負荷 Bearings - Airframe rolling rigid, single row ball bearings in steel diameter series 8 and 9. Dimensions and loads
BS EN 2011-1989 軸承規范.耐蝕鋼的8號和9號直徑系列機體剛性單列球軸承.尺寸和負荷 Specification for bearings - airframe rolling rigid single row ball bearings in corrosion resisting steel diameter series 8 and 9. Dimensions and loads
BS EN 2012-1989 軸承規范.鋼的0號和2號直徑系列機體剛性單列球軸承.尺寸和負荷 Specification for bearings - airframe rolling rigid, single row ball bearings in steel diameter series 0 and 2. Dimensions and loads
BS EN 2014-1989 軸承規范.耐蝕鋼的0號和2號直徑系列機體剛性單列球軸承.尺寸和負荷 Specification for bearings - airframe rolling rigid single row ball bearings in corrosion resisting steel diameter series 0 and 2. Dimensions and loads
BS EN 2015-1989 軸承規范.鋼的2號直徑系列機體雙列自調心球軸承.尺寸和負荷 Specification for bearings - airframe rolling double row, self aligning ball bearings in steel diameter series 2. Dimensions and loads
BS EN 2017-1989 軸承規范.耐蝕鋼的2號直徑系列機體雙列自調心球軸承.尺寸和負荷 Specification for bearings - airframe rolling double row self aligning ball bearings in corrosion resisting steel diameter series 2. Dimensions and loads
BS EN 2018-1989 軸承規范.鋼的3號和4號直徑系列機體單列自調心滾子軸承.尺寸和負荷 Specification for bearings - airframe rolling single row, self aligning roller bearings in steel diameter series 3 and 4. Dimensions and loads
BS EN 2020-1989 軸承規范.耐蝕鋼3號和4號直徑系列的機體單列自調心滾子軸承.尺寸和負荷 Specification for bearings - airframe rolling single row self aligning roller bearings in corrosion resisting steel diameter series 3 and 4. Dimensions and loads
BS EN 2022-1990 帶自潤滑內襯的耐蝕鋼的普通球面軸承規范.輕型系列.尺寸和負荷 Specification for bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Light series - Dimensions and loads
BS EN 2023-1989 軸承規范.帶自潤滑內襯的耐蝕鋼普通球面軸承.標準系列.尺寸和負荷 Specification for bearings - spherical plain in corrosion resisting steel with self-lubricating liner - Normal series - Dimensions and loads
BS EN 2063-1992 飛行器機體滾動軸承.技術規范 Airframe rolling bearings - Technical specification
BS EN 2064-1992 自潤滑軸套耐蝕鋼球面滑動軸承.技術規范 Bearings, spherical plain in corrosion resisting steel with self lubricating liner - Technical specification
BS EN 2067-1996 帶自調心球軸承的桿端頭.技術規范 Rod ends with self-aligning ball bearings - Technical specification
BS EN 2068-1996 帶自潤滑自調心軸承的桿端頭.技術規范 Rod ends with self-lubricating self-aligning bearings - Technical specification
BS EN 2079-1995 儀器和設備用的耐蝕鋼的帶法蘭的精密球形軸承.尺寸和負荷 Bearings, precision ball with flange in corrosion resisting steel, for instruments and equipment - Dimensions and loads
BS EN 2130-2001 航空航天系列.儀器和設備用耐蝕鋼制軸承和精密滾珠.技術規范 Aerospace Series - Bearings, precision ball in corrosion resisting steel for instruments and equipment - Technical specification
BS EN 2335-1990 無裝配槽的耐蝕鋼普通球面軸承規范.尺寸和載荷 Specification for bearings-spherical plain in corrosion resisting steel without assembly slot - Dimensions and loads
BS EN 2356-1989 耐蝕鋼滾動軸承用操縱鋼索的帶螺紋叉形端頭規范.尺寸和負荷 Specification for fork-ends threaded, control cable for rolling bearings in corrosion resisting steel - Dimensions and loads
BS EN 2360-1989 操縱鋼索的旋鍛耐蝕鋼滾動軸承的叉形端頭規范.尺寸和負荷 Specification for fork-ends for rolling bearings in corrosion resisting steel swaged on type, control cable - Dimensions and loads
BS EN 2498-1990 帶自潤滑內襯和螺紋柄的可調節的自調心普通軸承的桿形端頭規范.尺寸和規范 Specification for rod ends, adjustable self-aligning plain bearing, with self-lubricating liner and threaded shank - Dimensions and loads
BS EN 2501-1992 軸承.帶自潤滑內襯和寬內環的耐蝕鋼普通球面軸承.尺寸和負荷 Bearings, spherical plain in corrosion resisting steel with self-lubricating liner and wide inner ring - Dimensions and loads
BS EN 2584-2001 航空航天系列.具有自潤滑軸套的球面耐蝕鋼軸承.窄系列.環境溫度下的高負荷.尺寸和負荷 Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series - Elevated load at ambient temperature - Dimensions and loads
BS EN 2585-2001 航空航天系列.具有自潤滑軸套的球面耐蝕鋼軸承.寬系列.環境溫度下的高負荷.負荷和尺寸 Aerospace series - Bearings, spherical plain in corrosion-resisting steel with self-lubricating liner - Elevated load at ambient temperature - Dimensions and loads
BS EN 2790-1991 帶自潤滑套和嚙合量為1.5的螺紋軸的可動調自定位滾動軸承桿端.尺寸和負載 Rod ends, adjustable, self-aligning plain bearing with self-lubricating liner and threaded shank with engagement: 1.5 thread - Dimensions and loads
BS EN 3045-1994 機體軸承.鋼制的剛性單列滾珠軸承.0號和2號直徑系列.小游隙類.尺寸和負荷 Bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 0 and 2. Reduced clearance category - Dimensions and loads
BS EN 3046-1994 機體軸承.鍍鎘鋼的剛性單列滾珠軸承.0號和2號直徑系列.小游隙類.尺寸和負荷 Bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 0 and 2. Reduced clearance category - Dimensions and loads
BS EN 3047-1994 機體軸承.耐腐蝕鋼的剛性單列球軸承.0號和2號直徑系列.小游隙類.尺寸和負荷 Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 0 and 2. Reduced clearance category - Dimensions and loads
BS EN 3048-2001 有自潤滑軸套的防腐鋼球面軸承.輕型系列.環境溫度下的高負荷.尺寸和負荷 Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Light series - Elevated load at ambient temperature - Dimensions and loads
BS EN 3053-1994 機體軸承.鋼制的單列自調心滾子軸承.尺寸和負載 Bearings, airframe rolling - Single row self-aligning roller bearings in steel - Dimensions and loads
BS EN 3054-1994 機體軸承.鍍鉻的鋼制的單列自調心滾子軸承.尺寸和負載 Bearings, airframe rolling - Single row self-aligning roller bearings in steel, cadmium plated - Dimensions and loads
BS EN 3055-1994 機體軸承.耐蝕鋼的單列自調心滾子軸承.尺寸和負荷 Bearings, airframe rolling - Single row self-aligning roller bearings in corrosion resisting steel - Dimensions and loads
BS EN 3056-1994 機體軸承.鋼制的剛性雙列球軸承.尺寸和負荷 Bearings, airframe rolling - Rigid double row ball bearings in steel - Dimensions and loads
BS EN 3057-1994 機體軸承.鍍鉻的鋼制的剛性雙列球軸承.尺寸和負載 Bearings, airframe rolling - Rigid double row ball bearings in steel, cadmium plated - Dimensions and loads
BS EN 3058-1994 機體軸承..耐蝕鋼的剛性雙列球軸承.尺寸和負載 Bearings, airframe rolling - Rigid double row ball bearings in corrosion resisting steel - Dimensions and loads
BS EN 3280-1994 剛性或自調心的機體軸承.技術規范 Bearings, airframe rolling, rigid or self-aligning - Technical specification
BS EN 3281-1994 機體軸承.鋼制的剛性單列球軸承.8號和9號直徑系列.尺寸和負荷 Bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 8 and 9. Dimensions and loads
BS EN 3282-1994 機體軸承.鋼制的鍍鎘剛性單列球軸承.8號和9號直徑系列.尺寸和負荷 Bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 8 and 9. Dimensions and loads
BS EN 3283-1994 機體軸承.耐蝕鋼的剛性排列球軸.8號和9號直徑系列.尺寸和負荷 Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 8 and 9. Dimensions and loads
BS EN 3284-1994 機體軸承.鋼制的剛性單列球軸承.0號和2號直徑系列.標準游隙類.尺寸和負荷 Bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 0 and 2. Normal clearance category - Dimensions and loads
BS EN 3285-1994 機體軸承.鋼制的鍍鎘剛性單列球軸承.0號和2號直徑系列.標準游隙類.尺寸和負荷 Bearings; airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 0 and 2. Normal clearance category - Dimensions and loads
BS EN 3286-1994 機體軸承.耐蝕鋼的剛性單列球軸承.0號和2號直徑系列.標準游隙類.尺寸和負荷 Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 0 and 2. Normal clearance category - Dimensions and loads
BS EN 3287-1994 機體軸承.鋼制的雙列自調心球軸承.2號直徑系列.尺寸和負荷 Bearings, airframe rolling - Double row self-aligning ball bearings in steel - Diameter series 2. Dimensions and loads
BS EN 3288-1994 機體軸承.鋼制的鍍鎘雙列自調心球軸承.2號直徑系列.尺寸和負荷 Bearings, airframe rolling - Double row self-aligning ball bearings in steel, cadmium plated - Diameter series 2. Dimensions and loads
BS EN 3289-1994 機體軸承.耐蝕鋼的自調心雙列球軸承.2號直徑系列.尺寸和負荷 Bearings, airframe rolling - Double row self-aligning ball bearings in corrosion resisting steel - Diameter series 2. Dimensions and loads
BS EN 3290-1994 機體軸承.鋼制的單列自調心滾子軸承.3號和4號直徑系列.尺寸和負荷 Bearings, airframe rolling - Single row self-aligning roller bearings in steel - Diameter series 3 and 4. Dimensions and loads
BS EN 3291-1994 機體軸承.鋼制的鍍鎘單列自調心滾子軸承.3號和4號直徑系列.尺寸和負荷 Bearings, airframe rolling - Single row self-aligning roller bearings in steel, cadmium plated - Diameter series 3 and 4. Dimensions and loads
BS EN 3292-1994 機體軸承.耐蝕鋼的單列自調心滾子軸承.3號和4號直徑系列.尺寸和負荷 Bearings, airframe rolling - Single row self-aligning roller bearings in corrosion resisting steel - Diameter series 3 and 4. Dimensions and loads
BS EN 3446-1995 儀器和設備用的耐蝕鋼的不帶法蘭的精密球軸承.尺寸和負荷 Bearings, precision ball without flange in corrosion resisting steel, for instruments and equipment - Dimensions and loads
BS EN 3541-1992 帶螺柄的端桿、可調、自對準球軸承.尺寸、扭矩、間隙和載荷 Rod ends, adjustable, self-aligning ball bearing with threaded shank - Dimensions, torques, clearances and loads
BS EN 4035-2006 航空航天系列.減小內部徑向間隙和帶螺紋鈦合金桿耐腐蝕鋼可調自動對心雙列球軸承的桿端.尺寸和載荷 Aerospace series - Rod ends, adjustable with self-aligning double row ball bearing in corrosion resisting steel, reduced internal radial clearance and threaded shank in titanium alloy - Dimensions and loads
BS EN 4040-2006 航空航天.寬內環的帶自潤滑內襯的耐蝕鋼制關節軸承.室溫高負荷.尺寸和負荷 Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner with wide inner ring - Elevated loads at ambient temperature - Dimensions and loads
BS EN 715-1995 熱塑管道系統.小直徑壓力管和配件間端部負荷軸承接頭.在包含端推力的內部水壓下密封性的試驗方法 Thermoplastics piping systems - End-load-bearing joints between small diameter pressure pipes and fittings - Test method for leaktightness under internal water pressure, including end thrust
BS EN ISO 683-17-1999 熱處理鋼、合金鋼和易切削鋼.滾珠軸承和滾柱軸承鋼 Heat-treated steels, alloy steels and free-cutting steels - Ball and roller bearing steels
BS EN ISO 8826-1-1995 技術制圖.滾柱軸承.通用簡化畫法 Technical drawings - Roller bearings - General simplified representation
BS EN ISO 8826-2-1997 技術制圖.滾子軸承.詳細簡化畫法 Technical drawings - Roller bearings - Detailed simplified representation
BS ISO 104-2002 滾動軸承.止推軸承. 外形尺寸.總體計劃 Rolling bearings - Thrust bearings - Boundary dimensions, general plan
BS ISO 10766-2006 液壓動力.汽缸.活塞及連桿用矩形截面軸承環溝槽尺寸 Hydraulic fluid power - Cylinders - Housing dimensions forrectangular-sect bearing rings for pistons and rods
BS ISO 10792-1-1996 航空和航天.帶自潤滑襯瓦的耐腐蝕鋼機體球面滑動軸承.公制系列 Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Metric series
BS ISO 10792-2-1996 航空和航天.帶自潤滑襯瓦的耐腐蝕鋼機體球面滑動軸承.英制系列 Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Inch series
BS ISO 10792-3-1996 航空和航天.帶自潤滑襯瓦的耐腐蝕鋼機體球面滑動軸承.技術規范 Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Technical specification
BS ISO 113-1999 滾動軸承.軸承座.外形尺寸 Rolling bearings - Plummer block housings - Boundary dimensions
BS ISO 1132-1-2000 滾動軸承.公差.術語和定義 Rolling bearings - Tolerances - Terms and definitions
BS ISO 1132-2-2002 滾動軸承.公差.測量和校驗原理和方法 Rolling bearings - Tolerances - Measuring and gauging principles and methods
BS ISO 12043-1995 滾動軸承.單列圓柱形滾子軸承.活動肋和無肋側面倒角尺寸 Rolling bearings - Single-row cylindrical roller bearings - Chamfer dimensions for loose rib and non-rib sides
BS ISO 12044-1995 滾動軸承.單列角面接觸的滾珠軸承.外圈無止推側面倒角尺寸 Rolling bearings - Single-row angular contact ball bearings - Chamfer dimensions for outer ring non-thrust side
BS ISO 1206-2002 滾動軸承.尺寸系列為48,49和69的滾針軸承.邊界尺寸和公差 Rolling bearings - Needle roller bearings, dimension series 48, 49 and 69 - Boundary dimensions and tolerances
BS ISO 12128-2002 滑動軸承.潤滑油孔、油槽和油穴.尺寸、類型、標記及其對軸套的應用 Plain bearings - Lubrication holes, grooves and pockets - Dimensions, types, designation and their application to bearing bushes
BS ISO 12129-2-1995 滑動軸承.軸、法蘭和止推安裝環形狀、位置和表面粗糙度公差 Plain bearings - Tolerances on form and position and surface roughness for shafts, flanges and thrust collars
BS ISO 12132-2000 滑動軸承.薄壁軸瓦質量保證.FMEA設計 Plain bearings - Quality assurance of thin-walled half bearings - Design FMEA
BS ISO 12240-1-1998 球形滑動軸承.徑向球形滑動軸承 Spherical plain bearings - Radial spherical plain bearings
BS ISO 12240-2-1998 球形滑動軸承.角面接觸徑向球形滑動軸承 Spherical plain bearings - Angular contact radial spherical plain bearings
BS ISO 12240-3-1998 球形滑動軸承.止推球形滑動軸承 Spherical plain bearings - Thrust spherical plain bearings
BS ISO 12240-4-1998 球形滑動軸承.球形滑動軸承桿端 Spherical plain bearings - Spherical plain bearing rod ends
BS ISO 12303-1995 滑動軸承.質量特性.機器和加工性能的計算 Plain bearings - Quality characteristics - Calculation of machine and process capabilities
BS ISO 12307-2-2000 滑動軸承.卷制軸套檢驗.內徑的檢驗 Plain bearings - Checking of wrapped bushes - Checking the inside diameter
BS ISO 13012-1998 套筒型循環球體直線運動滾動軸承.附件 Rolling bearings, linear motion, recirculating ball, sleeve type - Accessories
BS ISO 13778-1999 滑動軸承.薄壁軸瓦的質量保證.小間隙范圍軸承的選配 Plain bearings - Quality assurance of thin-walled half bearings - Selective assembly of bearings to achieve a narrow clearance range
BS ISO 14728-1-2004 滾動軸承.線性運動滾動軸承.動態荷載額定值和額定壽命 Rolling bearings - Linear motion rolling bearings - Dynamic load ratings and rating life
BS ISO 14728-2-2004 滾動軸承.線性運動滾動軸承.靜態荷載額定值 Rolling bearings - Linear motion rolling bearings - Static load ratings
BS ISO 14839-1-2002 機械振動.裝有主動磁性軸承的旋轉機械裝置的振動.詞匯 Mechanical vibration - Vibration of rotating machinery equipped with active magnetic bearings - Vocabulary
BS ISO 14839-2-2004 機械振動.裝有主動磁性軸承的旋轉機械的振動.振動評價 Mechanical vibration - Vibration of rotating machinery equipped with active magnetic bearings - Evaluation of vibration
BS ISO 15-1998 滾動軸承.徑向軸承.邊界尺寸、一般計劃 Rolling bearings - Radial bearings - Boundary dimensions, general plan
BS ISO 15241-2002 滾動軸承.量值符號 Rolling bearings - Symbols for quantities
BS ISO 15242-1-2004 滾動軸承.振動測量方法.基本原則 Rolling bearings - Measuring methods for vibration - Fundamentals
BS ISO 15242-2-2005 滾動軸承.振動測量方法.帶圓柱芯和外表面的徑向滾珠軸承 Rolling bearings - Measuring methods for vibration - Radial ball bearings with cylindrical bore and outside surface
BS ISO 15242-3-2006 滾動軸承.振動測量方法.帶圓孔和外表面的向心球面和圓錐滾子軸承 Rolling bearings - Measuring methods for vibration - Radial spherical and tapered roller bearings with cylindrical bore and outside surface
BS ISO 15243-2004 滾動軸承.損害和故障.術語、特性和成因 Rolling bearings - Damage and failures - Terms, characteristics and causes
BS ISO 15312-2004 滾動軸承.熱速額定值.計算和系數 Rolling bearings - Thermal speed rating - Calculation and coefficients
BS ISO 16287-2005 滑動軸承.熱塑性軸襯.尺寸和公差 Plain bearings - Thermoplastic bushes - Dimensions and tolerances
BS ISO 199-2006 滾動軸承.止推軸承.公差 Rolling bearings - Thrust bearings - Tolerances
BS ISO 21107-2004 滾動軸承和球面滑動軸承.電子介質用查尋結構.用屬性詞匯標識的特性和性能標準 Rolling bearings and spherical plain bearings - Search structure for electronic media - Characteristics and performance criteria identified by attribute vocabulary
BS ISO 246-1995 滾動軸承.滾柱軸承、分離式止推環.界面尺寸 Rolling bearings - Cylindrical roller bearings, separate thrust collars - Boundary dimensions
BS ISO 2982-1-1996 滾動軸承.附件.錐形套筒.尺寸 Rolling bearings - Accessories - Tapered sleeves - Dimensions
BS ISO 2982-2-2001 滾動軸承.附件.防松螺母和鎖緊裝置.尺寸 Rolling bearings - Accessories - Locknuts and locking devices - Dimensions
BS ISO 3030-1997 滾動軸承.徑向針形滾筒和柜式組件.尺寸和公差 Rolling bearings - Radial needle roller and cage assemblies - Dimensions and tolerances
BS ISO 3031-2000 滾動軸承.止推滾針、保持架組件和止推墊圈.外形尺寸和公差 Rolling bearings - Thrust needle roller and cage assemblies, thrust washers - Boundary dimensions and tolerances
BS ISO 3096-1997 滾動軸承.針形滾筒.尺寸和公差 Rolling bearings - Needle rollers - Dimensions and tolerances
BS ISO 3245-1997 滾動軸承.拉制的杯形無內環滾針軸承.外形尺寸和公差 Rolling bearings - Needle roller bearings, drawn cup without inner rings - Boundary dimensions and tolerances
BS ISO 3290-2002 滾動軸承.球軸承.尺寸和公差 Rolling bearings - Balls - Dimensions and tolerances
BS ISO 3547-1-2000 滑動軸承.卷制軸套.尺寸 Plain bearings - Wrapped bushes - Dimensions
BS ISO 3547-2-2000 滑動軸承.卷制軸套.外徑和內徑試驗數據 Plain bearings - Wrapped bushes - Test data for outside and inside diameter
BS ISO 3547-3-2000 滑動軸承.卷制軸套.潤滑油孔、油槽和油穴 Plain bearings - Wrapped bushes - Lubrication holes, lubrication grooves and lubrication indentations
BS ISO 3547-4-2000 滑動軸承.卷制軸套.材料 Plain bearings - Wrapped bushes - Materials
BS ISO 3548-2000 滑動軸承.帶或不帶法蘭的薄壁軸瓦.公差、設計特點和試驗方法 Plain bearings - Thin-walled half bearings with or without flange - Tolerances, design features and methods of test
BS ISO 4381-2000 普通軸承.多層普通軸承用鉛錫鑄造合金 Plain bearings - Lead and tin casting alloys for multilayer plain bearings
BS ISO 4383-2000 普通軸承.薄壁普通軸承用多層材料 Plain bearings - Multilayer materials for thin-walled plain bearings
BS ISO 4384-1-2000 普通軸承.軸承合金的硬度試驗.復合材料 Plain bearings - Hardness testing of bearing metals - Compound materials
BS ISO 464-1995 滾動軸承.定位固定環的徑向軸承.尺寸和公差 Rolling bearings - Radial bearings with locating snap ring - Dimensions and tolerances
BS ISO 492-2002 滾動軸承.徑向軸承.公差 Rolling bearings - Radial bearings - Tolerances
BS ISO 5593-1998 滾動軸承.詞匯 Rolling bearings - Vocabulary
BS ISO 582-1995 滾動軸承.倒角尺寸.最大值 Rolling bearings - Chamfer dimensions - Maximum values
BS ISO 6811-1998 球形滑動軸承.詞匯 Spherical plain bearings - Vocabulary
BS ISO 7063-2004 滾動軸承.滾針軸承滾道滾針.邊界尺寸和公差 Rolling bearings - Needle roller bearing track rollers - Boundary dimensions and tolerances
BS ISO 7148-1-2000 滑動軸承.軸承材料摩擦特性試驗.軸承金屬試驗 Plain bearings - Testing of tribological behaviour of bearing materials - Testing of bearing metals
BS ISO 7148-2-2000 滑動軸承.軸承材料摩擦特性試驗.聚合物基體軸承材料試驗 Plain bearings - Testing of tribological behaviour of bearing materials - Testing of polymer-based bearing materials
BS ISO 8443-1999 滾動軸承.凸緣外圈向心珠軸承.凸緣尺寸 Rolling bearings - Radial ball bearings with flanged outer ring - Flange dimensions
BS ISO 9758-2001 航空器操縱鋼絲繩用滾動軸承的螺紋式鋼制叉形端.尺寸及載荷 Fork-ends, in corrosion-resistant steel, threaded, for rolling bearings, for aircraft control wire rope - Dimensions and loads
BS ISO 9760-2001 航空航天.航空器滾動軸承操縱鋼絲繩上的鍛制耐腐蝕鋼制叉形端.尺寸及載荷 Aerospace - Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope, for rolling bearings - Dimensions and loads
BS ISO/TS 16799-2000 滾動軸承.動力負荷額定值和額定壽命.基本動力負荷額定值計算中的不連續性 Rolling bearings - Dynamic load ratings and rating life - Discontinuities in the calculating of basic dynamic load ratings
KIT 162-2005 結構軸承匯編 Structural bearings kit

寧波三泰軸承有限公司 NINGBO SUNTHAI BEARING COMPANY
總機電話/TEL：0574-87223344 87222434 87220319 87220519
銷售電話/SALES TEL：0574-87220315 87222422（直撥）87222434 87223344 87220319   87220519（轉分機）
采購部電話/TEL：0574-87221977
傳真/FAX：0574-87223781
地址/ADD：寧波市麗園北路1728號--1736號
E-mail：web@sunthaibearing.com
網址/WEBSITE：m.huizhouweb.com    www.sunthai.com.cn  
三泰特種非標軸承網: www.fbearing.com  

商標 BRANDS:三泰

【文字顯示：大 中 小】【打印】 【關閉】  
在線客服